Oracle 11g Error Codes and Solution Suggestions from ORA-07700 to ORA-08000
- ORA-07700: sksarch: interrupt received
- Cause: An interrupt was received while archiving the logs
- Action: Retry operation
- ORA-07701: sksatln: internal exception: output buffer too small
- Cause: Overflow of buffer for parsing archive control text string
- Action: This is an internal error, please report to Oracle
- ORA-07702: unrecognized device type in archive text
- Cause: Unrecognized device type in archive text
- Action: This is an internal error, please report to Oracle
- ORA-07703: error in archive text: need ‘/’ after device type
- Cause: The archive control text in the ARCHIVE command is invalid; the device type (to indicate a file or tape) must be followed by a ‘/’.
- Action: Refer to the SQLDBA Guide for the proper syntax of the text.
- ORA-07704: error in archive text: need ‘:’ after device name
- Cause: The archive control text in the ARCHIVE command is invalid; the device name must be followed by a ‘:’.
- Action: Refer to the SQLDBA Guide for the proper syntax of the text.
- ORA-07705: sksaprs: device name buffer too small
- Cause: The buffer supplied for the device name is too small. This is an internal error.
- Action: Contact your customer support representative.
- ORA-07706: error in archive text: need disk file name
- Cause: The archive control text in the ARCHIVE command is invalid; the disk file name is missing.
- Action: Refer to the SQLDBA Guide for the proper syntax of the text.
- ORA-07707: error in archive text: need tape label name
- Cause: The archive control text in the ARCHIVE command is invalid; the tape label name is missing.
- Action: Refer to the SQLDBA Guide for the proper syntax of the text.
- ORA-07708: sksaprs: tape label name buffer too small
- Cause: The buffer supplied for the tape label is too small. This is an internal error.
- Action: Contact your customer support representative.
- ORA-07709: sksaprs: archiving to a remote host is not allowed
- Cause: The user specified a remote disk for archiving via DECnet.
- Action: Archive to a disk on the local host.
- ORA-07710: sksaprs: file name buffer too small
- Cause: The buffer supplied for the file name is too small. This is an internal error.
- Action: Contact your customer support representative.
- ORA-07713: sksamtd: could not mount archival device (SYS$MOUNT failure)
- Cause: VMS system service SYS$MOUNT failed
- Action: Examine system error message and refer to VMS documentation
- ORA-07715: sksadtd: could not dismount archival device (SYS$DISMNT failure)
- Cause: VMS system service SYS$DISMNT failed
- Action: Examine system error message and refer to VMS documentation
- ORA-07716: sksachk: invalid device specification for ARCHIVE
- Cause: VMS system service SYS$GETDVI failed”
- Action: Specify a valid device in ARCHIVE control string
- ORA-07717: sksaalo: error allocating memory
- Cause: VMS system service LIB$GET_VM failed”
- Action: Examine system error message and refer to VMS documentation
- ORA-07718: sksafre: error freeing memory
- Cause: VMS system service LIB$FREE_VM failed
- Action: Examine system error message and refer to VMS documentation
- ORA-07721: scgcm: not enough OS resource to obtain system enqueue
- Cause: d by the messages SS$_EXENQLM or SS$_INSFMEM.
- Action: Free up some of the required resource to allow the creation of the required lock.
- ORA-07740: slemop: incorrect handle size (programming error)
- Cause: structures used for reading error message files do not match
- Action: this is an internal error, please report to Oracle
- ORA-07741: slemop: $OPEN failure
- Cause: VMS system service $OPEN failed
- Action: Examine system error message and refer to VMS documentation
- ORA-07742: slemop: $CONNECT failure
- Cause: VMS system service $CONNECT failed
- Action: Examine system error message and refer to VMS documentation
- ORA-07743: slemop: incorrect error file attributes
- Cause: An error message file is of incorrect format
- Action: Unless an error file has been changed, report this to Oracle
- ORA-07744: slemcl: invalid error message file handle
- Cause: seal in passed in handle does not match correct value
- Action: this is an internal error, please report to Oracle
- ORA-07745: slemcl: $CLOSE failure
- Cause: VMS system service $CLOSE failed
- Action: Check system error and refer to VMS documentation
- ORA-07746: slemrd: invalid error message file handle
- Cause: seal in passed in handle does not match correct value
- Action: this is an internal error, please report to Oracle
- ORA-07747: slemrd: $READ failure
- Cause: VMS system service $READ failed
- Action: Check system error and refer to VMS documentation
- ORA-07750: slemcr: fopen failure
- Cause: An attempt to create a message file failed. This is an internal error.
- Action: Contact your customer support representative.
- ORA-07751: slemcr: malloc failure
- Cause: An attempt to allocate a cache for a newly-created message file failed. This is an internal error.
- Action: Contact your customer support representative.
- ORA-07753: slemcf: fseek before write failure
- Cause: An attempt to seek before writing a message file cache element failed. This is an internal error.
- Action: Contact your customer support representative.
- ORA-07754: slemcf: fwrite failure
- Cause: An attempt to write a message file cache element failed. This is an internal error.
- Action: Contact your customer support representative.
- ORA-07755: slemcf: fseek before read failure
- Cause: An attempt to seek before reading a message file cache element failed. This is an internal error.
- Action: Contact your customer support representative.
- ORA-07756: slemcf: fread failure
- Cause: An attempt to read a message file cache element failed. This is an internal error.
- Action: Contact your customer support representative.
- ORA-07757: slemcc: invalid handle
- Cause: The seal in a passed-in handle does not match correct value. This is an internal error.
- Action: Contact your customer support representative.
- ORA-07758: slemcw: invalid handle
- Cause: The seal in a passed-in handle does not match correct value. This is an internal error.
- Action: Contact your customer support representative.
- ORA-07759: slemtr: invalid destination
- Cause: The destination string provided to the function is too short This is an internal error.
- Action: Contact your customer support representative.
- ORA-07760: slemtr: $open failure
- Cause: the $open service failed. This is an internal error
- Action: Contact your customer support representative.
- ORA-07800: slbtpd: invalid number
- Cause: An impossible request for binary to decimal conversion was made
- Action: This conversion cannot be performed
- ORA-07801: slbtpd: invalid exponent
- Cause: An impossible request for binary to decimal conversion was made
- Action: This conversion cannot be performed
- ORA-07802: slbtpd: overflow while converting to packed decimal
- Cause: An impossible request for binary to decimal conversion was made
- Action: This conversion cannot be performed
- ORA-07803: slpdtb: invalid packed decimal nibble
- Cause: An impossible request for decimal to binary conversion was made
- Action: This conversion cannot be performed
- ORA-07804: slpdtb: number too large for supplied buffer
- Cause: An impossible request for decimal to binary conversion was made
- Action: This conversion cannot be performed
- ORA-07820: sspscn: SYS$CRELNM failure
- Cause: An error was returned from the SYS$CRELNM function
- Action: Check system error and refer to VMS documentation
- ORA-07821: sspsdn: SYS$DELLNM failure
- Cause: An error was returned from the SYS$DELLNM function
- Action: Check system error and refer to VMS documentation
- ORA-07822: sspscm: SYS$CREMBX failure
- Cause: An error was returned from the SYS$CREMBX function while trying to create the process dump mailbox.
- Action: Check system error and refer to VMS documentation
- ORA-07823: sspsqr: $QIO failure
- Cause: An error was returned from $QIO while trying to queue a read to the process dump mailbox.
- Action: Check system error and refer to VMS documentation
- ORA-07824: sspain: $SETIMR failure
- Cause: An error was returned from SYS$SETIMR while trying to queue a process spin-watch timer.
- Action: Check system error and refer to VMS documentation
- ORA-07825: sspsck: $QIO failure at AST level
- Cause: An error was returned from SYS$QIO while trying to read the process dump mailbox.
- Action: Check system error and refer to VMS documentation
- ORA-07826: sspscm: SYS$GETDVIW failure
- Cause: An error was returned from SYS$GETDVIW while trying to get information about the process dump mailbox.
- Action: Check system error and refer to VMS documentation
- ORA-07840: sllfop: LIB$GET_VM failure
- Cause: An error was returned from LIB$GET_VM while attempting to allocate memory for an i/o vector.
- Action: Check system error and refer to VMS documentation
- ORA-07841: sllfop: SYS$OPEN failure
- Cause: An error was returned from SYS$OPEN while attempting to open the data file for reading
- Action: Check system error and refer to VMS documentation
- ORA-07842: sllfcl: SYS$CLOSE failure
- Cause: An error was returned from SYS$CLOSE while attempting to close the input data file
- Action: Check system error and refer to VMS documentation
- ORA-07843: sllfcl: LIB$FREE_VM failure
- Cause: An error was returned from LIB$FREE_VM while attempting to free the memory for the i/o vector
- Action: Check system error and refer to VMS documentation
- ORA-07844: sllfop: LIB$GET_VM failure
- Cause: An error was returned from LIB$GET_VM while attempting to allocate memory for data and index buffers
- Action: Check system error and refer to VMS documentation
- ORA-07845: sllfcl: LIB$FREE_VM failue
- Cause: An error was returned from LIB$FREE_VM while attempting to free memory used by data and index buffers
- Action: Check system error and refer to VMS documentation
- ORA-07846: sllfop: string byte record too big for string byte user buffer
- Cause: The longest record in the file will not fit into the largest data buffer that can be allocated
- Action: Modify the RMS file to have smaller records
- ORA-07847: sllfop: $CONNECT failure
- Cause: An error was returned by SYS$CONNECT while attempting to open the data file
- Action: Check system error and refer to VMS documentation
- ORA-07848: sllfrb: $GET failure
- Cause: An error was returned by SYS$GET while attempting to read the data file
- Action: Check system error and refer to VMS documentation
- ORA-07849: sllfsk: $GET failure
- Cause: An error was returned by SYS$GET while attempting to skip records in the input file
- Action: Check system error and refer to VMS documentation
- ORA-07850: sllfop: bad option
- Cause: You are using a bad option to loader Fixed= is one legal option. Check documentation for others.
- Action: Check documentation
- ORA-07860: osnsoi: error setting up interrupt handler
- Cause: An error occurred while setting up the control interrupt handler
- Action: This is an internal error. Contact your Oracle representative.
- ORA-07880: sdopnf: internal error
- Cause: A list of all files open by this process could not be obtained.
- Action: This is an internal error. Contact your customer support representative.
- ORA-08000: maximum number of session sequence lists exceeded
- Cause: the sequence parent state objects for this session are all used
- Action: an internal error; quit the session and begin a new one